The Conveyor 600 is modular and thereby easy to adjust to different needs. Different selections for belt with or without knobs, wheels or legs and different sides, makes it a highly flexible solution. The possibility of bi-directional belt and signal from external machines increases range of use even more.
Belt without knobs is recommended when used with a gradient of less than 15 degrees.
Belt with knobs is recommended when used with a gradient of between 15 and 35 degrees.
The Conveyor 600 is modular to fit different installations. The middle section is delivered in sections of 1,5 or 3 meters, and may be installed horizontally with wheels or ascending with legs.
Conveyor 600 can be connected and started automatically by for instance the ExactFeeder. The conveyor can also be control manually.
A sensor monitors the rotation of the end roller to detect slipping, and stops the system if installed in automatic systems.
Technical specifications for the Conveyor 600.
Conveyor 600 is delivered with start modul, end module and middle module. The middle module can be cut to fit the installation. Conveyor 600 can be delivered in lengths up to 50 meters.
Belt without knobs is recommended when used with a gradient of less than 15 degrees. Belt with knobs is recommended when used with a gradient of between 15 and 35 degrees.
|Length, drive module||543 mm|
|Length, mid section||1 500 or 3 000 mm (installed)|
|Length, end section||360 mm|
|Width||1 019 mm|
|Width, belt||600 mm|
|Effect, motor||1,1 kW|
|Rotational speed||1 450 rpm|
|Belt speed||106 m/min|
See user manual for more information