Manual control
The FlexiFeeder is controlled by physical switches on the machine. Remote control for the conveyor is available for more flexible use.
FlexiFeeder Standard
L: 2,4 m | V: 2,8 m3
FlexiFeeder Standard has two drums, one with 20 knives in six rows. The knives are mounted using one unbrako bolt for convenient installation and replacing. The upper drum is spiked to ensure rotation of the bale.
TECHNICAL DETAILS
FlexiFeeder Standard
| Length | 2 420 mm |
| Width | 1 620 mm |
| Height | 1 600 mm |
| Weight | 820 kg |
| Internal Volume | 2,3 m³ |
| Max bale diameter | 1,60 m (1 200 kg) |
| Max bale width | 1,20 m |
| Power (230 V) | 35 A |
| Power (400 V) | 25 A |
| Effect, cutter | 7,50 kW |
| Effect, Conveyor | 0,75 kW |
| Cutting time (grass) | 5-10 min per bale* |
| Cutting time (straw) | 10-25 min per bale* |
* Cutting time may vary depending on many factors like bale size, type of grass, knives and program
FlexiFeeder Long
L: 2,8 m | V: 3,1 m3
Longer version has increased volume of 0,8 cubic meters in the chamber. Suitable for a variety of forage.
TECHNICAL DETAILS
FlexiFeeder Long
| Length | 2 820 mm |
| Width | 1 620 mm |
| Height | 1 600 mm |
| Weight | 950 kg |
| Internal Volume | 3,1 m³ |
| Max bale diameter | 1,60 m (1 200 kg) |
| Max bale width | 1,20 m |
| Power (230 V) | 35 A |
| Power (400 V) | 25 A |
| Effect, cutter | 7,50 kW |
| Effect, Conveyor | 0,75 kW |
| Cutting time (grass) | 5-10 min per bale* |
| Cutting time (straw | 10-25 min per bale* |
* Cutting time may vary depending on many factors like bale size, type of grass, knives and program
FlexiFeeder with integrated feed table
FlexiFeeder with integrated magazine makes it easy to load the chopper when empty. The integrated magazine decreases spillage compared to a free-standing magazine.
The magazine is available in different lengths.
TECHNICAL DETAILS
FlexiFeeder with integrated feed table
| Short feed table | Long feed table |
| Length | mm | mm |
| Width | mm | mm |
| Height | 1 600 mm | 1 600 mm |
| Weight | kg | kg |
| Internal Volume (cutter) | 2,3 m³ | 2,3 m³ |
| Max bale diameter | 1,60 m (1 200 kg) | 1,60 m (1 200 kg) |
| Max bale width | 1,20 m | 1,20 m |
| Power (230 V) | 35 A | 35 A |
| Power (400 V) | 25 A | 25 A |
| Effect, cutter | 7,50 kW | 7,50 kW |
| Effect, Conveyor | 0,75 kW | 0,75 kW |
| Effect, feed table | 2 x 0,55 kW | 2 x 0,55 kW |
| Cutting time (grass) | 5-10 min per bale* | 5-10 min per bale* |
| Cutting time (straw | 10-25 min per bale* | 10-25 min per bale* |
* Cutting time may vary depending on many factors like bale size, type of grass, knives and program
FlexiFeeder for straw
In collaboration with farmers all over the country, we have now developed a chopper specifically for straw.
- The chopper is prepared with expansion of straw in mind
- The result is fluffy and well cut forage
- Possible to install 60 knives for dry matter
- Manual control, low power consumption and compact
- May be connected to a system
- Knife setup and rotation speed specifically set up for straw
TECHNICAL DETAILS
FlexiFeeder for straw
| Length | 2 420 mm |
| Width | 1 620 mm |
| Height | 1 600 mm |
| Weight | 820 kg |
| Internal Volume | 2,3 m³ |
| Max bale diameter | 1,60 m |
| Max bale width | 1,20 m |
| Power (230 V) | 35 A |
| Power (400 V) | 25 A |
| Effect, cutter | 7,50 kW |
| Effect, Conveyor | 0,75 kW |
| Cutting time (straw) | 10-25 min per bale* |
* Cutting time may vary depending on many factors like bale size, type of grass, knives and program
CrossFeeder
The CrossFeeder distributes forage to the left or right side of the feed alley.
Available in short (110 cm) and long (170 cm) versions.
Funnel
The funnel gathers the forage towards the middle of the machine width. Is used if it is desired to feed through a hole in the floor or a narrow alley.
Is available in short an long version.
Beam trolley
Beam trolley for suspending and moving machine along rails. Available in manual and motorized versions.
Remote control for conveyor
Remotely controlling the conveyor opens up for easier forage handling, especially in tight places or when machine is placed on another floor.
Knives
Standard knives. Our most aggressive knives with wavy edge for high capacity.
Knives for dry matter. Straight-edged knife to prevent jamming when cutting dry matter.
Knives for reduced flow. Shorter knives reduce the flow. Often used in automated systems where limited capacity is required.
Reinforced knife. Straight-edged knife made from thicker goods to increase longevity. Compatible only with 4 mm reinforced knife drum.
The knives are available in sets of 20 knives, including bolts and wear template.
Free-standing feed table
A feed table enables the possibility of storing multiple bales for easy loading into the cutter.
The free-standing feed table is used if you already have a bale chopper, or want to use a feed table combined with a rail-going solution. The feed table is available in different lengths.
Are your knives good enough?
The knives are regarded as the heart of the machine.
Over time, the knives will become dull. This is observed by longer cutting time and poorer cutting, and is fixed by sharpening the knives. After repeated sharpening, the knife may be worn out. Check height and shape by comparing the knife with our knife wear template.
Straw or frozen mass?
Making the forage rotate in the chopper is fundamental for optimal function. Straw or frozen grass may in some cases rotate poorly in older machines.
The remedy in these cases may be to to weld knobs to the carriers on the conveyor.